Map; Install Map; Requirements; Password For Map - Sharp AR-P13 Service Manual

3.

MAP

3.1

Install MAP

MAP (IPX/SPX Management Access Program) is a utility that communicates with the Print Server Card installed in this ma-
chine via IPX/SPX protocol. MAP also allows the setup page of the Print Server Card to be used through a WWW browser. The
same items in the setup page of the Print Server Card can be set up, as in one of WebPage. This machine can be set up even
in the network where TCP/IP protocol cannot be used.
NOTE:
• Use WebPage when your computer and the printer are connected in network with the
TCP/IP protocol.
• There are some different items that can be setup in MAP and not in WebPage.
Please do not change any other items except the items at the NetWare Setup page of MAP.
3.1.1

Requirements

OS Windows 95/98/NT 4.0/2000
Protocols IPX/SPX and TCP/IP must be installed.
*TCP/IP must be installed but it is unnecessary to set up.
WWW Browser Internet Explorer 4.0 or later version, Netscape Navigator 4.0 or later
3.1.2

Password for MAP

To change some settings at MAP , the password must be entered to submit the change.
• Password for MAP : sysadm
CAUTION:
Do not forget the password. Otherwise, you can no longer change the settings at MAP.
3.1.3

Installing MAP

1. Start Windows on a personal computer or a workstation.
2. Insert the provided CD-ROM into the CD-ROM drive.
3. Click on the [Setup Utilities] button.
4. Click on the [MAP Setup] button.
5. Click on the [Setup] button.
• The setup program starts.
6. Read the description displayed on Setup Program screen for MAP , then click on [Next].
• The Setup Program will be interrupted and edit the program being operated by clicking on [Cancel].
• The Setup Program will forward to next step of installation by clicking on [Next].
7. Read "MAP Installation Notes" and then click on [Yes].
8. Assign the path where you want to install, then click on [Next].
9. Assign the name of the Program Folder of MAP to be placed on Start menu, then click on [Next].
• Installation begins.
10. Click on [OK] after the message that the installation is completed is displayed.
• Remove the CD-ROM from the drive after the installation is completed.
4-21