Sharp AR-P13 Service Manual page 51

Menu Screen
Printing JOB Job Delete
Printer Printer
Information Information
Internal Font
Items
DELETE
BACK
The status of printer function settings is informed. Settings are performed at Printer
SETUP in Administrator menu.
Printer Number of
copies
Paper Size
Location
Sort Mode
Hole Punch
Destination
Duplex Printing
Orientation
Printing Order
Smoothing
Emulation Mode Selected Emulation.
PCL Symbol Set
Font Number
Font Pitch (inch) PCL font pitch.
Font Size (point) PCL font size.
Page Length
(line)
Parallel Timeout (sec.)
Internal Font
The sorted list in each emulation of Internal Font installed in this machine is displayed.
Emulation
Internal Font
BACK
4-20
Description
The print job is deleted by clicking. The [DELETE] but-
ton disappears once it has been clicked.
Return to Printing JOB Screen.
The number of printing copies.
The size of paper selected.
The selected tray from which paper is fed.
Setting of sort and staple functions.
The position for the holes.
The location of where copies are output.
Duplex printing and binding method.
The printing direction.
The printing order of pages.
Selected smoothing ON or OFF status.
Setting of Symbol Set.
PCL font number.
The number of lines for a page.
Timeout is informed when the printing is performed from
the computers connected in parallel ports. If the time
that sending a print job is paused is over the set time,
the print job will be canceled.
The list of Resident Font is displayed.
Emulation Mode which can use Internal Font.
The list of Internal Font can be used in each Emula-
tion Mode.
Return to Printer Information Screen.