Table of Contents
Advertisement
6.
Using Windows NT 4.0
6.1
Before Setting up
•
Connect this machine and the computer to the network.
•
Turn on the power of this machine.
•
Assign the IP address to this machine.
•
Check that TCP/IP Protocol and Microsoft TCP/IP Printing are installed in Windows NT. If not, install them.
•
Set up the TCP/IP network setting at WebPage.
6.2
Setting up the TCP/IP Printing Services
Log in for Windows NT with "Administrator" group or user of "PowerUsers" group.
(1) Click on the Start button and choose [Settings].
(2) Choose [Printers].
(3) Double-click on [Add Printer].
(4) Add Printer Wizard is started.
(5) Make sure that [My computer] is selected and click on the [Next] button.
(6) Click on [Add Port...].
(7) Choose [LPR Port] from [Available Printer Ports].
(8) Click on [New Port...].
(9) Enter at fields as following:
•
Name or address of server providing Ipd:
•
Name or printer or print queue on that server: PORT1(Must be entered in the capital letter.)
(10) Click on [OK].
(11) Click on [Close].
(12) The port is added to [Available Ports] of Add Printer Wizard.
(13) Make sure that the check box for the added port is turned on, then click on [Next].
(14) Click on [Have Disk...].
(15) Insert the CD-ROM.
(16) Specify the folder that contains the driver for Windows NT 4.0 at [Copy manufacturer's files from].
•
When the PCL-5e driver is installed and CD-ROM drive is D drive, enter "D:\DRIVER\ENGLISH\NT4_0\PCL5E".
•
Refer to Readme file in CD-ROM for the configuration of CD-ROM contents.
(17) Click on [OK].
(18) Select the printer driver to be installed.
(19) Click on [Next].
(20) Change Printer name if necessary, and click on [Next].
(21) Click on [Next].
(22) Choose [Yes] or [No] as your choice if you wish to perform test printing or not, and click on [Finish].
(23) The printer is created.
IP address for this machine
3-16
Advertisement
Chapters
Table of Contents
Troubleshooting
