The AR-DU3 is equipped with the duplex feature only, and the AR-DU4 is additionally equipped with the manual paper feed feature. AR-DU3 models is equipped with the paper exit port, which allows installation of the optional paper exit tray, the AR-TE3. (AR-DU4 standard)
Paper capacity Overseas:100 sheets (standard paper:80g/m²) DV4: When the tray is extended fully. Post card: 20 sheets DU3: The AR-TE3 is not installed. Transparency film: 20 sheets B.Duplex part Paper type Plain, recycled, pre-printed, pre-punched, color, letter head, labels, heavy,...
[4] UNPACKING AND INSTALLATION 4) Connect the harness to the main unit of the printer. <1>Remove the screw that fixes the harness cover of the main unit of the printer and then slide the harness cover up to remove it. 1.AR-DU3 Screw <Before installation>...
Page 5
2.AR-DU4 4) Connect the harness to the main unit of the printer. <1>Remove the screw that fixes the harness cover of the main unit of the <Before installation> printer and then slide the harness cover up to remove it. Screw •For installing AR-DU4, an optional desk (multi purpose drawer, stand/3 x 500 sheet paper drawer or stand/MPD &...
[5] EXTERNAL VIEWS AND INTERNAL STRUCTURES A. External view " Paper exit tray (AR-TE3, AR-DU4 standard) Manual paper feed tray (AR-DU4 only) Paper feed module side cover Manual paper fed extension tray B. Internal structure Paper exit section Transports section...
Page 7
C. Motor, clutch, solenoid 4. DGS/ 1. SPM_HI 2. SPM_LO 7. MSS 3. ADUFM/ 5. MPFC 6. MPFS Code Name Function Remark SPM_HI Upper transport motor Upper section paper transport SPM_LO Lower transport motor Lower section paper transport ADUFM/ Cooling fan motor Cooling the ADU DGS/ Gate solenoid upper...
[6] MACHINE OPERATION 1. Setting the printer driver for duplex 2. Copying in the duplex mode module, bypass tray and exit tray For copying in the duplex mode, press the COPY key on the operation panel and make all selections on the copy mode basic screen. When using the duplex module (including the bypass tray and the exit A.
[7] ADJUSTMENTS B. Alignment of the guide plate and the size mark 1) Press and hold [MENU] key and [OK] key together, and turn on the 1. Paper guide position adjustment in the main switch. manual paper feed section (AR-P350 / P450, "ON"...
Page 10
2. Aper guide position adjustment in the B. Width detection level adjustment in simulations manual paper feed section 1) Enter the sub code of SIM 40-2, and the menu below will be displayed. (With the AR-350M/450M, DM-3551/4551, a scanner installed) SIMULATION 40-2 BYPASS TRAY ADJUSTMENT.SELECT 1-4,AND PRESS START.
[8] DISASSEMBLY AND ASSEMBLY, MAINTENANCE 1.Maintenance System Table Check (Clean, replace, or adjust as necessary.) Clean Replace Adjust Lubricate Move position A. When installed to a AR-series machine When Part name 100K 150K 200K 250K 300K 350K 400K Remark calling Paper feed Paper feed rollers separation section...
Page 12
C. After disassembly of the paper feed unit/lower 3. Disassembly and assembly cover A. External cabinet For disassembly of the paper feed unit and the lower cover, refer to (1) ADU lower cover (AR-DU3 only) the following descriptions. 1) Open the ADU cover. 2) Remove the ADU lower cover.
Page 13
(4) Paper exit section cover/door switch B. Manual paper feed section (AR-DU4 only) (1) Manual paper feed unit (5) Upper cabinet/paper exit sensor (2) Manual paper feed tray AR-DU3/DU4/TE3 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-3...
Page 14
(3) Manual paper feed solenoid (5) Sensors Note: Note for assembly of the rotation VR sensor (4) Shutter solenoid AR-DU3/DU4/TE3 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-4...
Page 15
(6) Manual paper feed roller D. ADU drive PWB E. ADU gate solenoid Note: When assembling, fit the edge of the solenoid mounting plate with the center of the mark. F. Rollers/Belts/Clutches C. Upper transport motor/Lower transport motor/Fan (1) Transport follower roller motor AR-DU3/DU4/TE3 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-5...
Page 16
(2) Transport roller/belt/clutch G. Sensors (1) Paper entry sensor (2) Transport sensor AR-DU3/DU4/TE3 DISASSEMBLY AND ASSEMBLY, MAINTENANCE-6...
Page 21
+5V1 4.7K UPPER TRANSPORT MOTOR I=0.6A(Pend.) 1J(1W) 6.8KJ SPM_HI /A 332K/50V +24V 222K/50V SPM_HI A SPM_HI /B VREF1 +5V1 SPM_HI B 47U/35V 222K/50V 332K/50V Rs A 223Z/50V Vs A 6.8KJ 1J(1W) Vs B 4.7KJ DTR001 Rs B CR A Vref A CR B Vref B HI A...
Page 22
COPYRIGHT COPYRIGHT COPYRIGHT 2001 BY SHARP CORPORATION 2001 BY SHARP CORPORATION 2001 BY SHARP CORPORATION All rights reserved. All rights reserved. All rights reserved. Printed in Japan. Printed in Japan. Printed in Japan. No part of this publication may be reproduced,...