Macintosh - Sharp AR-P13 Service Manual

5.7.2

Macintosh

Out of setting items in the print dialog box, "Printer Specific Options", which are the items specific to this machine, is listed
below. The other setting items are common in Laser Writer 8.
Item
Paper Source
Destination
Printing Order
Sort Mode
Hole Punch
This selects the paper source.
• Auto Select
As the default setting, this is selected. It automatically selects the cassette to feed paper,
according to the paper size.
• Upper Cassette
Feeds paper from the Upper Cassette.
• Middle Cassette
Feeds paper from the Middle Cassette.
• Lower Cassette
Feeds paper from the Lower Cassette.
• Large Capacity Feeder
Feeds paper from the Large Capacity Feeder.
• Manual Feed Unit
Feeds paper from the Manual Feed Unit.
This selects the destination of printed paper.
• Auto Select or Tray
As default setting, this is selected. The printed paper is ejected on the tray when no finisher
is installed.
The printed paper is ejected on Tray 2 of the finisher when the finisher is installed.
• Tray 1
Available only when the finisher is installed.
Select this when printed paper is to be ejected on Tray 1 (upper tray) of the finisher.
• Tray 2
Available only when the finisher is installed.
Select this when printed paper is to be ejected on Tray 2 (lower tray) of the finisher.
This sets the order of printing.
• Normal
A text created in application software is printed from the first to the last pages.
• Reverse (Default)
It is set with "Reverse (Default)" when shipped from the factory.
A text created in application software is printed from the last to the first pages.
As the printed paper comes out with the printed side up, setting to "Reverse" will sort all
the pages in the normal order from the first page on top.
This sets sorting and stapling.
• None
Sheets of paper are ejected without being sorted.
• Sort
"Sort" is selected as default setting.
Select this for sort-printing only (1,2,3..., 1,2,3...).
• Upper Left (available only when the Finisher is installed)
Select this for sort-printing and stapling Upper Left (to staple at 1 position on the upper left).
• Upper Right (available only when the Finisher is installed)
Select this for sort-printing and stapling Upper Right (to staple at 1 position on the upper right side).
• Left (Double) (available only when the Finisher is installed)
Select this for sort-printing and stapling Left (Double) (to staple at 2 positions on the left).
• Top (Double) (available only when the Finisher is installed)
Select this for sort-printing and stapling Top (Double) (to staple at 2 positions at the top of the paper.)
This selects the position for the holes.
• None
Ejects paper without punching holes.
• Left
The holes are punched on the left of the paper.
• Top
The holes are punched at the top of the paper.
4-44
Functions