Using The Standard Windows Ps Printer Driver (Windows 98/Me/Nt 4.0) - Sharp MX-C400P Software Setup Manual

INSTALLING THE PRINTER DRIVER
USING THE STANDARD WINDOWS PS
PRINTER DRIVER (Windows 98/Me/NT 4.0)
If you wish to use the standard Windows 98/Me/NT 4.0 PS printer driver, follow
the steps below to install the PPD driver using the Add Printer Wizard.
• The CD-ROM does not include software for Windows 98/Me/NT 4.0.
Contact your dealer or nearest SHARP Service Department if you want
software for Windows 98/Me/NT 4.0.
• If you are using Windows 2000/XP/Server 2003/Vista/Server 2008/7, you can
install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver.
The Readme file will be in the [EnglishA] folder inside the folder that contains
the extracted files after you get the software.
1
Download the software and save the extracted files in any folder.
2
Click the [Start] button, select [Settings] and then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of the PPD file, enter the path as follows.
Operating system
Windows 98/Me
Windows NT 4.0
After installation, see "CONFIGURING THE PRINTER DRIVER FOR THE
OPTIONS INSTALLED ON THE MACHINE" (page 34) to configure the printer
driver settings.
32
PPD file path
(Folder containing extracted files)\EnglishA\PPD\9XME
(Folder containing extracted files)\EnglishA\PPD\NT40