Using The Standard Windows Ps Printer Driver (Windows 98/Me/Nt 4.0) - Sharp AR-P27 Software Setup Manual

USING THE STANDARD WINDOWS
PS PRINTER DRIVER (Windows
98/Me/NT 4.0)
If the PS3 expansion kit is installed on the machine and you wish to use the standard Windows 98/Me/NT
4.0 PS printer driver, follow the steps below to install the PPD driver using the Add Printer Wizard.
• The CD-ROM does not include software for Windows NT 4.0.
Note
Contact your dealer or nearest authorized service representative if you want the software for Windows NT 4.0.
• If you are using Windows 2000/XP/Server 2003, you can install the PPD driver from the installer.
• Be sure to view the Readme file (Readme.txt) before installing the PPD driver. If you are using Windows
98/Me, the Readme file is in the [EnglishA]* folder of the "Software CD-ROM". If you are using Windows NT
4.0, the Readme file will be in the [EnglishA]* folder inside the folder that contains the extracted files after
you get the software. For the location of the folder, see step 4.
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
2
Click the [Start] button, select [Settings] and
then click [Printers].
3
Double-click the [Add printer] icon.
The "Add Printer Wizard" will appear.
4
Follow the on-screen instructions.
When you are asked to specify the path of
the PPD file, enter the path as follows.
Installing the resident font information (Windows 98/Me)
If you have installed the PPD driver on Windows 98/Me and will be using the resident fonts in the
machine, you must install the resident font information. Follow the procedure below to install the
resident font information.
• Before installing the resident font information, be sure to install the PPD driver.
Note
• In the event that a resident font cannot be selected in a software application, install the resident
font information again.
1
Insert the "Software CD-ROM" into
your computer's CD-ROM drive.
Insert the "Software CD-ROM" that shows
"Disc 1" on the front of the CD-ROM.
2
Double-click [My Computer] (
then double-click the [CD-ROM] icon
( ).
(Substitute the letter of your CD-ROM
drive for "R" in the following paths.)
Operating system
Windows 98/Me
Windows NT 4.0
* In regions other than the U.S., enter "English"
instead of "EnglishA".
Note
3
Double-click the [Drivers] folder, the
[Printer] folder, the [EnglishA] folder (for
regions other than the U.S., double-click the
[English] folder), the [PPD] folder, the
[9XME] folder, and then [PFMSetup.exe].
) and
4
Follow the on-screen instructions.
After the resident font information has
been installed, restart your computer.
PPD file path
R:\Drivers\Printer
\EnglishA*\PPD\9XME
(Folder containing
extracted files)
\EnglishA*\PPD\NT40
After installation, see "CONFIGURING
THE PRINTER DRIVER" (page 24) to
configure the printer driver settings.
23