Installing The Software Access Point; Windows Nt Installation - Toshiba Magnia Z310 User Manual

Software Access Point
Selection of wired LAN

Installing the Software Access Point

This section describes the procedures used to install the Magnia Software Access Point.
Follow the procedure applicable to your operating system.

Windows NT installation

NOTE: You must have a wireless LAN card installed in your server. Do not install the
wireless LAN card driver or software. If the driver or software is installed, uninstall it.
1 Log on as a user with administrator authority.
2 Activate Setup.exe in the \Public\LAN\Toshiba\TSAP\AP on the Server Setup Tool
installation CD.
The following screen displays.
The wired LAN network to be connected must be
set. This setting is required only at the access point.
Installing the Software Access Point
330