Setting Up A Disk Array (Raid); External Device Bay Unit Z1 - Front View - Toshiba Magnia Z310 User Manual

Expansion Device Setup
6 Reattach the front panel. Plug in the power cable.
NOTE: The OS settings or application software may have to be changed when a
hard disk drive is added.
If you replaced a hard disk drive with the system running, recover (rebuild) the disk.
See IDE MegaRAID Configuration Console
CAUTION: The failure of other devices may destroy and lose programs or data.
Replace a faulty device as quickly as possible, and recover the disk array.

Setting up a disk array (RAID)

Refer to Setting up a disk array (RAID)

External Device Bay Unit Z1 - Front View

Front view with the front panel closed
The front access panel can be locked or unlocked as shown in the following illustration.
Key lock
Power indicator
Fault indicator
®
Unlock
Lock
External Device Bay Unit Z1 - Front View
on page 228.
on page 64 for more information.
Key lock
120