Chapter 2 Connecting Hardware Devices; Connecting Optional Hardware Devices; Before You Start - Toshiba Magnia Z310 User Manual

Chapter 2
Connecting Hardware
Devices
This chapter contains information and instructions on installing and removing optional
devices.

Connecting Optional Hardware Devices

Before You Start

Before installing an optional device, read the device manufacturer's instructions and any
additional installation instructions in this manual. The procedures described in this
chapter require specific technical knowledge and experience. If you have not installed or
removed optional devices, or if the job seems difficult, consult an authorized Toshiba
®
Magnia service provider. Toshiba assumes no liability for damages if you install and/or
remove optional devices yourself.
DANGER: Some parts carry high voltages and are dangerous. To avoid electric
shock, shut down the server and disconnect the power cable before performing any
server maintenance. Some parts of the equipment can cause electric shock at any
time. Avoid coming in contact with parts that are not relevant to the installation
procedure you are performing.
Retrieve screws dropped into the equipment. Screws left inside the equipment can
damage the server. Make sure all screws are tightened correctly.
75