Advanced - Toshiba Magnia Z310 User Manual

IDE MegaRAID Configuration Console

Advanced

Click Advance in the left frame to display the Advanced Settings of the MegaRAID
Configuration Console. See the screen below. The fields are described in the table
below.
Field
Fail Physical
Drive if Error
Threshold
Reached
Start
Rebuilding if
Error Threshold
Reached
Check Array for
Rebuild at
Startup
Stop
Rebuilding if
Rebuilding
Error Threshold
Reached
Marks drive as Failed when error threshold is reached. After
marking as Failed this drive can't be used anymore. Drive
status can only be changed from the BIOS configuration
utility. This option is not set by default.
MegaRAID Configuration Console begins an automatic
rebuild if the array has more than a specified number of
errors. If so, it starts an automatic rebuild.
* - This option is valid only for arrays set for reliability mode
(RAID 1 mirrored arrays.)
MegaRAID Configuration Console checks the number of
errors in the arrays to see if they need rebuilding.
If the maximum number of errors allowed is found in an array
during rebuild, MegaRAID Configuration Console will stop
the rebuild.
Managing the IDE Controllers
Description
248