Server Setup Tool
5
Select Create Floppy Disks option.
6
Select from the following items.
LSI IDE RAID Windows 2000 Driver <Windows 2000>
Adaptec SCSI Windows 2000 Driver <Windows 2000>
Intel LAN Windows 2000 Driver <Windows 2000>
7
Click Create.
8
Insert an unused diskette, then click OK.
Insert blank disks, if necessary.
If necessary, remove the Startup Disk.
9
After creating the diskettes, you must label the diskettes:
FD label: LSI IDE RAID Windows 2000 Driver <Windows 2000>
FD label: Adaptec SCSI Windows 2000 Driver <Windows 2000>
FD label: Intel LAN Windows 2000 Driver <Windows 2000>
NOTE: To check the label descriptions, select Detail on the Create Floppy Disks
screen and see the SST Help.
Selecting the disk driver
Selecting the IDE CD-ROM Controller driver
Use the driver contained on the CD-ROM of the Windows 2000 Server.
Selecting a driver for the IDE RAID controller
To select the driver, follow these steps.
Windows 2000 Manual Installation
200