Toshiba Magnia Z310 User Manual page 86

Connecting Hardware Devices
3 Loosen the thumb screws securing the server to the rack and pull the base
assembly forward.
Pulling the base assembly forward
4 Remove the screw(M3) securing the base assembly to the server.
Removing the base assembly screw
5 Slide the server out of the rack.
Sliding the server into the rack
1 Gently slide the server into the base assembly.
2 Secure the base assembly to the server with one screw.
3 Slide the entire base assembly into the rack.
4 Tighten the four thumbscrews on the front brackets.
5 If cables were disconnected from the back of the server, connect them.
Screw(M3)
86
Maintenance Overview