Toshiba Magnia Z310 User Manual page 242

IDE MegaRAID Configuration Console
Field
Check All
Partitions
Stop on Error
When the Check Consistency begins, Checking Consistency will flash next to the array
that is being checked. You can abort the Check Consistency by clicking on Abort Check
Consistency in the right frame.
You can view the progress of the Check Consistency by clicking on Device Progress in
the left frame.
The following table describes the fields on the Device Progress screen.
Check this option to perform the consistency check on all
valid partitions (Logical Drives). Option is valid only for
Windows RAID Servers.
Check this option to stop the consistency check on read/
write errors.
Managing the IDE Controllers
Description
242