Getting Started
Menu configuration
When the SCSI Utility starts, the Main Menu displays:
The internal SCSI drive is connected to the controller. Use only the "Configure/View Host
Adapter Setting." Do not modify the "SCSI Disk Utilities" setting.
SCSI Utility Keyboard Commands
<Esc>
<Enter>
<↑>
<↓>
Changing SCSI Device Settings
1
Using the arrow keys (<↑><↓>), select the desired item then press the <Enter> key.
The submenu or selection menu corresponding to the selected item appears.
2
Make any necessary changes then save the changes.
3
Select Exit this Menu to exit the submenu.
Returns control to the previous screen mode.
Specifies a data item.
Returns control to the previous data item.
Advances control to the next data item.
Setting the system configuration
61