Toshiba Magnia Z310 User Manual page 241

IDE MegaRAID Configuration Console
frame. The link to the Array Properties, Check Consistency, and Rebuild is listed below
the Array ID. See the screen below.
NOTE: Rebuild and Consistency Check and Rebuild Array are high usage
operations. Only one action per RAID Server is allowed at a time.
Click Check Consistency to check the correctness of the redundant data in an array. You
can choose to make the data on both drives identical. This function can be performed
only on RAID1 and RAID10 arrays.
When you click Check Consistency, the following options display in the right frame, as
shown in the screen below.
Managing the IDE Controllers
241