Connecting Hardware Devices
5
Push the new hard disk drive into the slot.
Installing the hard disk drive
6
Push in the retention lever.
Pushing in the retention lever
7
Attach the front panel.
8
Connect the power cable and switch on the server.
NOTE: The OS settings or application software may have to be changed when a
hard disk drive is added.
9
Recover (rebuild) the disk. See
for more information.
CAUTION: The failure of other devices may destroy and lose programs or data.
Replace a faulty device as quickly as possible, and recover the disk array.
IDE MegaRAID Configuration Console
Installing Hard Disk Drives
on page 228
107