CIX40 Installation
CIX40 R5.20 Software
CIX40 R5.20 Software
The system is pre-programmed with a limited database that allows the system function from initial
power-up for easy, cost effective installation.
CIX40 Software Backup and Restore Capability
•
CIX40 R4 SW will not run on R2 or R3 HW
A Release 4 CIX40 system can be upgraded to Release 5.20 software. The R4 SW Database
•
is backed up, then restored on the upgraded, R5.20 SW processor.
A database can only be restored on the same release HW
•
•
A database backed-up on a R1 HW system cannot be restored to a R2HW or R3 HW
system.
•
A database backed-up on a R2 HW or R3 HW system cannot be restored to a R1 HW
system.
R5.20 SW database cannot be restored to a R4 SW system
•
System software and customer database backup and restore. Backup and restore is only possible
with same-type hardware. Refer to the Table below.
Backup From:
R5.20 SW
CIX40 System Licenses
The analog CO lines, digital telephones, standard telephones, four voice mail ports, DTMF circuits,
attendant consoles, ACD VA ports and BSIS serial ports do not require a license for operation on
the CIX40. IP Ports on the optional GIPH and MIPU cards, and more than four (up to eight) voice
mail require licensing on the GCTU2A processor as follows:
Each Toshiba IPT2000 anf IP5000 series telephone and SIP Telephone requires one LIC-CIX-
•
IP_Port license.
•
Each Strata Net IP channel requires a LIC-CIX-STRN-CH license.
•
Toshiba SoftIPTs require a LIC-SOFTIPT license and one LIC-CIX-IP_Port license for each
SoftIPT.
Two additional voice mail ports are provided by each LIC-2 GVPH license, up to the system
•
maximum of eight.
•
Licenses are required on the Media Application Server (MAS), Stratagy® SES, and customer
provided PCs for applications such as ACD, Net Phone, TASKE®, Oaisys®, Feature Flex®,
VCS™, Insight, etc.
1-4
R4 SW
R1 HW
R1 HW
R2 / R3 HW
Restore To:
R4 SW
R1 HW
R2 HW
R1 HW
Allowed
Allowed
Allowed
Strata CIX40 R3 Installation & Maintenance
R5.20 SW
R2 / R3 HW
No
No
No
Allowed
05/10