Setting The Marker Display - Sony PDW-850 Operation Manual

Y: Message is displayed.
N: Message is not displayed.
Message display
condition
When the filter
selection has been
changed
When the gain
setting has been
changed
When the setting of
the WHITE BAL
switch has been
changed
When the
OUTPUT/DCC
switch has been set
to DCC ON or OFF
When the shutter
speed and mode
setting has been
a)
changed
When the black or
white balance has
been adjusted
a) This is also displayed for about 3 seconds when the
SHUTTER selector is set to ON.
Changing the display mode
1
Display the VF DISP 1 page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" (page 184).
2
Select VF DISP MODE, and press the
MENU knob.
3
Select the desired display mode, and
press the MENU knob.
194
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Message Display
mode
setting
1 2 3
FILTER: n (where N N Y
n = 1, 2, 3, 4)
GAIN: n (where n N N Y
= –6dB, –3dB, 0dB,
3dB, 6dB, 9dB,
12dB, 18dB, 24dB,
30dB, 36dB, 42dB)
WHITE: n (where n N N Y
= A CH, B CH,
PRESET) or ATW:
RUN
DCC: ON (or OFF) N Y Y
:SHUTTER: N Y Y
1/100 (or 1/125,
1/250, 1/500,
1/1000, 1/2000,
ECS)
E.g. AWB : OK N Y Y

Setting the marker display

Switch the display of the center and safety zone
markers on or off, and select whether the area
indicated by the safety zone marker is 80%, 90%,
92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the MARKER 1 or MARKER 2
page of the OPERATION menu, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" (page 184).
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
Item Description
MARKER To hide all markers, set to
"OFF".
CENTER To display the center marker,
set to "ON".
CENTER Selects the display mode of the
MARK center marker.
SAFETY To display the safety zone, set
ZONE to "ON".
SAFETY Selects the safety zone range
AREA (80%, 90%, 92.5% or 95%).
ASPECT To display the aspect marker,
set to "ON".
ASPECT Selects the aspect mode (15:9/
SELECT 14:9/13:9/4:3/1.85/2.35).
ASPECT To make the areas out of the
MASK selected aspect marker dimmer,
set to "ON".
ASPECT To set the mask level, when the
MASK LVL ASPECT MASK is set to
"ON".
100% To display the effective pixel
a)
MARKER area, set to "ON".
a) 100% MARKER is disabled when the focus
assist indicator is displayed.