Sony PDW-850 Operation Manual page 202
Hide thumbs
Also See for PDW-850:
- Specifications (2 pages) ,
- Operation manual (95 pages) ,
- Operation manual (280 pages)
Table of Contents
Advertisement
Function
DIGITAL
b)
EXTENDER
CLIP CONT
REC
UA01 to
c)
UA10
VF COLOR
DETAIL
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 2 switch allows you to display or not to
display all markers.
b) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched on and off.
c) This does not appear if nothing is assigned in the
Assign menu.
Note
For functions that are assigned to the ASSIGN 2
(slide-type) switch, you cannot change those
settings using other menus. The function assigned
to the ASSIGN 2 switch takes precedence over the
menu setting.
3
Select the desired function, and press
the MENU knob.
The function is assigned, and the
ASSIGNABLE SW page appears again.
To add functions that can be assigned to
the ASSIGN switches
When shipped from the factory, UA01 to UA10
user-assignable items in the ASSIGN switch
function list are blank. You can register up to ten
functions in these items.
1
Display the EDIT ASSIGN SEL page of
the USER MENU CUSTOMIZE menu,
and press the MENU knob.
For details about using the menus, see "Menu
Operations" (page 184).
202
Adjustments and Settings from Menus
Content
Assigns the function that
electronically magnifies the
central part of the picture. (All
video output is magnified,
including recorded video.)
x2, x3, and x4 are available
for selection.
Assigns the function that
turns the Clip Continuous Rec
function on and off.
Assigns the items assigned in
the ASSIGN SEL menu.
Assigns the VF color detail
function.
E21 EDIT ASSIGN SEL
2
Move the b cursor to the item to set
using the MENU knob, and press the
MENU knob.
The EDIT FUNCTION page appears.
EDIT FUNCTION
INSERT
MOVE
DELETE
BLANK
3
knob.
?P00 CONTENTS
09.VF DISP 2
10.VF DISP 3
4
Add an item as follows.
until the desired page appears, and then
knob.
The EDIT ASSIGN SEL page appears again,
displaying the added item.
5
Repeat steps 2 to 4 to add the remaining
items.
You can register up to ten items.
Operation of the ASSIGN 1/2/3/4 switches when
UA01 to UA10 are assigned
When an on/off switchable function (or menu
item) is assigned to one of the ASSIGN 1/2/3/4
TOP
ESC
TOP
Advertisement
Table of Contents
