Sony PDW-850 Operation Manual page 157

No. Page Item
05 BLACK BLACK GAMMA
GAMMA
BLACK GAM RANGE LOW/L.MID/H.MID/
BLACK GAM LEVEL (–99 to 99)
TEST OUT SELECT
06 KNEE KNEE
KNEE POINT
KNEE SLOPE
KNEE SATURATION
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL
07 DETAIL 1 DETAIL
APERTURE
DETAIL LEVEL
APERTURE LEVEL
DTL H/V RATIO
CRISPENING
LEVEL DEPEND
LEVEL DEPEND LVL (–99 to 99)
DETAIL FREQUENCY (–99 to 99)
Settings Description
OFF/ON Turns the black gamma
correction on or off.
Sets the range affected by black
HIGH gamma.
Adjusts the master black gamma.
VBS/Y/R/G/B Selects the output signal of TEST
OUT connector.
OFF/ON Turns the knee correction circuit
on or off.
50.0% to 95.0% to Sets the knee point level.
109.0%
(–99 to 99) Set the knee slope level.
OFF/ON Turns the knee saturation
function on or off.
(–99 to 99) Sets the knee saturation level.
OFF/ON Turns the white clipping function
on or off.
NTSC: 90.0% to Adjusts the white clipping level.
108.0% to 109.0%
PAL: 90.0% to 105.0%
to 109.0%
OFF/ON Sets the detail correction function
on or off.
OFF/ON Turns the aperture correction
function on or off.
(–99 to 99) Sets the general level of the detail
signal.
(–99 to 99) Sets the aperture correction level.
(–99 to 99) Sets the level of the V detail
signal.
(–99 to 99) Sets the crispening level.
OFF/ON Turns the level depend function
on or off.
Sets the level of the level depend.
Sets the frequency of the H detail
signal.
157
Menu List