Sony PDW-850 Operation Manual page 173

No. Page Item
14 CAM ALAC
CONFIG 3
15 PRESET COLOR TEMP <P> Display
WHITE
C TEMP BAL <P>
R GAIN <P>
G GAIN <P>
AWB ENABLE <P> OFF/ON
16 DCC ADJUST DCC FUNCTION
SEL
DCC D RANGE
DCC POINT
DCC GAIN
DCC DELAY TIME (–99 to 99)
DCC PEAK FILTER (–99 to 99)
Settings Description
OFF/AUTO Specifies whether to activate the aberration
correction function.
OFF: Do not activate.
AUTO: Activate aberration correction when a
lens that supports aberration correction is
mounted.
Note
For some aberration correction lenses, the
aberration correction function may not activate
("ALAC" does not appear in the viewfinder)
immediately after this unit is powered on, even
when this item is set to "AUTO". If this occurs,
turn the zoom and focus rings of the lens all the
way to one side, and then check to make sure that
"ALAC" has appeared in the viewfinder.
Contact your dealer or a Sony service
representative for more information about
lenses that support aberration correction.
Sets the white balance preset value.
reference color
temperature.
(–99 to 99) Finer setting when the desired color could not
be obtained with the COLOR TEMP <P>
color temperature setting.
(–99 to 99) Sets the R gain preset value.
(–99 to 99) Sets the G gain preset value.
When the WHITE BAL switch is set to PRST,
turns the function that enables execution of
AWB (auto white balance) on and off.
DCC/FIX Enables or disables automatic knee point
adjustment when the OUTPUT/DCC switch is
set to CAM, DCC: ON.
DCC: Automatically adjust the knee point
according to the luminance of the
subject.
FIX: Set the knee point to a fixed value.
400%/450%/ Sets the dynamic range when the OUTPUT/
500%/550%/ DCC switch is set to CAM, DCC: ON.
600%
(–99 to 99) Adjusts the DCC minimum knee point.
(–99 to 99) Adjusts the gain to DCC detected value.
Adjusts the DCC reaction speed.
Adjusts the response sensitivity to the peak of
the DCC detected value.
173
Menu List