Recording Continuous Timecode Via Ftp Connection - Sony PDW-850 Operation Manual

SITE DF
Acquires the amount of free disc space.
Syntax: SITE <SP> DF <CRLF>
SITE CHMOD
Locks and unlocks clips. Also sets permissions for
directories and files in the General directory.
Syntax: SITE CHMOD <SP> <flag> <SP> <path-
name> <CRLF>
Specify one of the following values in <flag>,
according to the specification in <path-name>.
• When a clip is specified in <path-name>:
444: Lock.
666: Unlock.
• When a directory in the General directory is
specified in <path-name>:
555: Forbid writing to the directory.
777: Allow writing to the directory.
• When a file in the General directory is specified
in <path-name>:
444: Forbid writing to and execution of the file.
555: Forbid writing to the file, but allow
execution.
666: Allow writing to the file, but forbid
execution.
777: Allow writing to and execution of the file.
Input example: SITE CHMOD 444 Clip/
C0001.MXF (Lock clip C0001.MXF)
SITE TCPR
Presets the starting timecode of a clip copied with the
STOR command. Specify the timecode in the format
"ffssmmhh" (ff: frames, ss: seconds, mm: minutes, hh:
hours).
Notes
• This command remains in effect until a STOR
command is executed, or (if no STOR command is
executed) until the FTP connection is terminated.
• If a SITE UMMD command is executed after this
command, the SITE UMMD command takes priority
and this command is discarded.
• If this command is executed several times in sequence,
the last command takes priority.
Syntax:
SITE TCPR <SP> <timecode > <CRLF>
Input example: SITE TCPR 00050001
(The starting timecode is preset to
01:00:05:00.)
Recording Continuous
Timecode via FTP
Connection
When you are connected to the unit via FTP, you
can create new clips with timecode that is
continuous with the timecode of the last frame of
the last clip on the disc. To record continuous
timecode, set PRESET/REGEN/CLOCK switch
to "REGEN", and then proceed as follows.
Use the "STOR" command to transfer clip files
from the computer that is connected to this unit. If
you issue the "SITE UMMD" command
immediately before the "STOR" command, the
original timecode of the transferred file is
recorded, regardless of the setting of PRESET/
REGEN/CLOCK switch.

Recording Continuous Timecode via FTP Connection

229