White Balance Memory; Gain Value - Sony PDW-850 Operation Manual

Connection completed (signal strength 0): One
gray segment lights.
Connection completed (signal strength 1 to 4):
White segments light. The number of white
segments (1 to 4) indicates the reception
signal level (1 to 4).
Bottom of viewfinder screen
a
E X Z 99
H D 4 2 2 5 0 E 0 0 0 1 : 0 0 1 / 0 0 4 D C I N
13.9 K +
C O N T
F A N
W H I T E : N G
L E V E L T O O H I G H
R E C 2 T C G
5600 L O W L I G H T
1 W:A 18 dB 1/ 2000
defghij k
a External device control and single clip
playback
REC2: Appears when SDI REC CONTROL set
to RM and HDSDI REMOTE I/F is set to
"CHARA" in the CAM CONFIG 1 page of
the MAINTENANCE menu, and this unit is
controlling recording by an external device
connected to the SDI OUT
1/2 connectors (HDSDI output).
REC2 P PARALLEL REC: "Rec2P" appears
when SDI REC CONTROL is set to "PARA"
in the CAM CONFIG 1 page of the
MAINTENANCE menu, and a device that
supports simultaneous recording is
connected to the SDI OUT 1/2 connectors
(HDSDI output).
SNGL: Appears when SINGLE CLIP MODE in
the CAM CONFIG 1 page of the
MAINTENANCE menu is set to "ON", and
the unit is searching or playing a clip (see
page 74).
1) SDI OUT 1 SELECT or SDI OUT 2 SELECT on the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
b Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" (page 193).
30
Locations and Functions of Parts and Controls
b c
W 1 2 13.4V
35-30
E X T
0 1 : 2 3 : 4 5 : 1 5 H D S D I
1 35 30 - 125C F1.7
2
l m n
1)
1)
c External input status and aberration
correction function
EXT HDSDI: When the REC VIDEO SOURCE
item on the SOURCE SEL page of the
OPERATION menu has been set to EXT,
then "EXT" and the signal type (HDSDI)
flashes when a valid signal is input to this
unit.
For details, see "Recording video from external
devices" (page 93).
ALAC: Appears when ALAC in the CAM
CONFIG 3 page of the MAINTENANCE
menu is set to "AUTO" (see page 173).
d Electric color temperature filter/Scene
file number
The electric color temperature filter display
appears when the CC 5600K function is set to
ON.
When DISP SCENE FILE on the VF DISP 3 page
of the OPERATION menu is set to "ON", the
number of the currently loaded scene file ("S1" to
"S5") appears instead of the filter display.
e Filter
Indicates the currently selected filter type (see
page 13).
The optical CC filter position (A, B, C, or D)
appears to the right side of the ND filter display
(1 to 4).
f White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
A: Displayed when the WHITE BAL switch is set
to A.
B: Displayed when the WHITE BAL switch is set
to B.
P: Displayed when the WHITE BAL switch is set
to PRST or when the preset button on an RM-
B170 has been pushed.
T: Displayed when ATW is being used.
g Timecode
Indicates the elapsed recording/playback time,
timecode, user bits or other information selected
by the DISPLAY switch (see page 18).
h Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.