Table of Contents
Advertisement
4-7-3 Setting the Marker Display
Use the MARKER page of the OPERATION menu to specify the
display setting for the various markers and to turn the mask function
which dims all areas except the markers on or off.
Setting the marker display
Follow the procedure below to select the items.
4
1
Set the VF DISP switch to MENU.
2
Turn the MIC/MENU knob until the MARKER page appears, and
push the MIC/MENU knob.
MARKER: Set to OFF to turn off all markers. Set to ON to turn
them all on. This item must be set to ON in order for the
DISPLAY/ASPECT switch to function.
CENTER: To display the center marker, set to ON. If this item is
set to ON, you can select the type of center marker (1 to 4)
SAFETY ZONE: To display the safety zone, set to ON. If this
item is set to ON, you can set the safety zone range (80%, 90%,
92.5%, or 95%).
MKR MODE: Selects the operation mode (16:9, 4:3 or VISTA) for
the following four items.
FRAME: To display the 4:3 or VISTA frame, set to ON.
MASK: To turn 4:3 or VISTA mask function on, set to ON.
MASK LEVEL: Set the 4:3 or VISTA mask level (0 to 100%)
EFFECT: To display the effective pixel area, set to ON.
3
Turn the MIC/MENU knob to move the arrow (→) to the item you
want to set, and push the MIC/MENU knob.
The arrow (→) changes to a question mark (?).
4-42
Chapter 4 Adjustments and Settings for Recording
Advertisement
Table of Contents
