Sony PDW-850 Operation Manual page 158

No. Page
08 DETAIL 2
09 SD DETAIL
158
Menu List
Item Settings
KNEE APERTURE OFF/ON
KNEE APT LVL (–99 to 99)
DETAIL LIMIT (–99 to 99)
DTL WHT LMT (–99 to 99)
DTL BLK LMT (–99 to 99)
DTL V-BLK LMT (–99 to 99)
V DTL CREATION NAM/G/R+G/Y
H/V CONTROL MODE H/V /V
SD DETAIL OFF/ON
SD DETAIL LEVEL (–99 to 99)
SD CRISPENING (–99 to 99)
SD DTL WHT LIMIT (–99 to 99)
SD DTL BLK LIMIT (–99 to 99)
SD LEVEL DEPEND OFF/ON
SD LV DEPEND LVL (–99 to 99)
SD DTL FREQUENCY (–99 to 99)
SD DTL H/V RATIO (–99 to 99)
SD CROSS COLOR (–99 to 99)
(When NTSC(J)AREA
or NTSC AREA is
selected on the
FORMAT page)
Description
Turns the knee aperture function
on or off.
Sets the knee aperture level.
Sets the both detail black and
white limiters.
Sets the detail white limiter.
Sets the detail black limiter.
Sets the V detail black limiter.
Selects the source signal of the V
DTL signal.
Selects the operation mode of
DTL H/V RATIO on the
DETAIL 1 page.
H/V: H and V increase and
decrease in inverse
proportion
V: V DTL only enabled
Turns the SD detail correction on
or off.
Sets the general level of the SD
detail signal.
Sets the SD crispening level.
Sets the SD detail white limiter.
Sets the SD detail black limiter.
Turns the SD level depend
function on or off.
Sets the level of the SD level
depend.
Sets the frequency of the SD H
detail signal.
Sets the level of the SD V detail
signal.
Sets the SD cross color reduction
level.