Displaying The Status Confirmation Screens - Sony PDW-850 Operation Manual

2
Select one of ID-1 to ID-4, and press the
MENU knob.
A x mark appears over the first character
position in the string, and characters can now
be input.
020 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
3
Enter or change the shot ID.
When you are entering the whole shot ID, go
to 2.
1 Turn the MENU knob to move the
mark to the character which you want
to change, then press the MENU knob.
020 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
2 Turn the MENU knob until the
moves to the character position that
you want to select, then press the
MENU knob.
Example: "+" character
020 SHOT ID
ID-1 :?+
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
4
Repeat step 3 for each of the remaining
characters.
5
When the input is complete, turn the
MENU knob to move the
END, then press the MENU knob.
This ends the input, and returns to the
original SHOT ID page.
TOP
ESC END
x
TOP
ESC END
x mark
TOP
ESC END
x mark over
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
To insert a space
In step 3 above, move the x mark over INS, and
press the MENU knob.
To cancel inserting a space, move the x mark
over RET, then press the MENU knob.
To delete a character
In step 3 of "Setting the shot ID" (page 196),
move the x mark over DEL, and press the
MENU knob.
This deletes the character under the x mark in the
shot ID row.
To cancel deleting the character, move the x
mark over RET, and press the MENU knob.
To cancel changing shot ID
Before executing step 5 of "Setting the shot ID"
(page 196), move the b mark over ESC, then
press the MENU knob or flick the CANCEL/
PRST/ESCAPE switch to ESCAPE.
Displaying the status
confirmation screens
You can confirm the settings or status of the
camcorder on the LCDs by displaying the
following four screen.
ABNORMAL <!> screen
This window allows you to confirm why the !
(warning) indicator lights in the viewfinder.
You can use the '!' LED page of the
OPERATION menu to set whether or not the !
(warning) indicator lights.
SYSTEM screen
This screen displays information such as the
system frequency, the recording format, whether
output from the TEST OUT connector is on or
off, and the type of output signal.
FUNCTION screen
This screen displays the functions assigned to the
ASSIGN switches, ZEBRA ON/OFF, the
detection level, and other information.
AUDIO STATUS screen
This screen allows you to confirm the following
items related to audio.
• Audio bit rate
• Setting condition of DF/NDF
• Type of front microphone
197