Setting Marker Display - Sony HDC-900 Operation Manual

Setup Using the OPERATION Menu
Item Condition to unlight
ND Type of ND filter (one or more can be
specified among 1 to 5)
CC Type of ND filter (one or more can be
specified among A to E)
WHITE White balance memory (one or more can
be specified among P(PRST), A, and B)
D5600K ON or OFF
GAIN GAIN switch position L, M, or H
SHUTT ON or OFF
FAN AUTO 1, AUTO 2, MIN or MAX
EXT ON or OFF
FORMAT Video format 59.94I, 60I, 30PsF,
29.97PsF, 50I, 25PsF, 24PsF, or
23.98PsF
The "?" mark changes back to the arrow marker
(c) .
Example:
To light an exclamation mark (!) when the ND
filter 1 or 2 is selected, select "ON" for the item ND
in the IND column, then display "- - 3 4 5" in
the NORMAL column.
4
Repeat step 3, to make other settings as required.
5
When the menu operation is completed, set the
DISPLAY switch to ON.
The menu display disappears from the viewfinder
screen, and the display indicating the current status of
the camera appears along the top and bottom of the
screen.

Setting Marker Display

The MARKER page of the OPERATION menu is
used to turn ON or OFF the display of the various
markers, mask, and effective pixel area. It is also used
to set display areas and display positions.
1
Set the DISPLAY switch to MENU.
2
Turn the MENU SELECT knob to display the
MARKER page, and push the MENU SELECT
switch toward ENTER.
30(E)
MARKER page
<MARKER>
MARKER
CENTER
SAFETY ZONE:(OFF)
EFFECT
ASPECT MODE:
MASK
VAR WIDTH : ---
SAFETY
The current setting of each item appears to the
right of the item.
Item Contents
MARKER Toggles all markers on or off.
CENTER Selects the type of center marker (1 to 4)
when the CENTER MARKER switch is
set to ON.
SAFETY Selects the safety zone area (80%, 90%,
a)
ZONE 92.5%, or 95%) when the SAFETY ZONE
switch is set to ON.
EFFECT To display the effective pixel area, set to
ON.
ASPECT Selects the aspect mode among from
MODE b) 16:9, 15:9, 14:9, 13:9, 4:3, VAR H,
VAR V, 1035, VISTA1, VISTA2.
MASK b) Adjust the mask level (0 to 100%) for the
function to make the areas out of the
selected aspect maker dimmer when the
SCREEN SIZE MARKER switch is set to
the position.
VAR Effective only when VAR H or VAR V is
WIDTH b) selected for ASPECT MODE.
VAR H: You can change the aspect size
horizontally.
VAR V: You can change the aspect size
vertically.
b)
SAFETY Set the safety marker for the selected
aspect mode.
a) When the SAFETY ZONE switch is set to OFF,
"(OFF)" is displayed. The selection can be made
only at ON.
b) When the VF SCAN switch is set to "4:3," "- - -"
is displayed.
3
Perform the desired settings for each item.
1 Turn the MENU SELECT knob to move the
arrow marker (c) to the item you want to set,
then press the MENU SELECT switch toward
ENTER.
The arrow marker (c) changes to a question
mark (?).
3
c
: ON
:(OFF) 3
90.0%
: OFF
4:3
:(OFF) ---
:(OFF) 90.0%