Sony PDW-850 Operation Manual page 129

Disc Menu
Load Planning Metadata/
PM_001_sample
PM_002_sample
PM_003_sample
PM_004_sample
Notes
• If MEMORY REC on the MEMORY REC page
of the OPERATION menu is set to ENABL, it is
not possible to load planning data from a USB
flash drive that is write inhibited. Set MEMORY
REC to DSABL before starting, or enable
recording on the USB flash drive and connect it
again.
• If the message "USB M. INHI" appears when you
connect a USB flash drive, disconnect the drive,
enable recording on the USB flash drive, and then
connect it again.
• Depending on the type of USB flash drive, data
may not appear if you attempt to read planning
metadata immediately after connecting the USB
flash drive. In this case, connect the USB flash
drive again, or exit the menu and try again. The
data will then appear correctly.
4
Select the desired planning metadata
file, and then press the SET/S.SEL
button or the MENU knob.
The selected planning metadata file is loaded
into the unit's memory, and the Planning
Metadata Properties screen appears.
5
Check the information that appears,
and press the SET/S.SEL button or the
MENU knob.
By connecting this unit and a computer over a
network, you can read planning metadata using a
web browser. For details, see "To use a web browser
to load planning metadata" (page 133).
To sort planning metadata
You can sort planning metadata by operating in
the same way as in "To sort clip lists" (page 127).
However, in step 3, select "Sort Planning
Metadata by...".
The planning metadata will be displayed in the
specified order the next time you load planning
metadata.
Professional Disc
04 AUG 10:39
04 AUG 10:39
04 AUG 10:39
04 AUG 10:39
Name &Date/ Sorted by Name
To check planning metadata properties
You can check the properties of the planning
metadata that is loaded into this unit's memory,
including the date and time of creation and the
clip titles.
See page 108 for more information about GUI
screen operations.
1
Display the Disc Menu.
2
Select "Planning Metadata Properties",
and then press the SET/S.SEL button or
the MENU knob.
The Planning Metadata Properties screen
appears.
File Name: Planning metadata file name
Assign ID: Assign ID
Created: Date and time of creation
Modified: Date and time of most recent
modification
Modified by: Name of person who modified
the file
1)
Title1: Title 1
Title2: Title 2
Material Gp: Number of clips recorded with
this planning metadata
1) This can be set as the clip name (see page 91).
To scroll hidden parts of the string into
view
When a B or b mark is displayed for an item,
you can press the left or right arrow button to
scroll the display by one character for each
press.
The up and down arrow buttons scroll the
beginning and end of the string into view.
To return to the previous screen
Press the SET/S.SEL button or the MENU
knob.
129
Disc Operations