Sony PDW-850 Operation Manual page 166

Hide thumbs Also See for PDW-850:
Table of Contents

Advertisement

No.
Page
06
AUDIO-1
07
AUDIO-2
166
Menu List
Item
Settings
FRONT MIC
MONO/STREO Input mode selection for front microphone.
SELECT
AUDIO CH3/4
CH1/2/SW
MODE
REAR XLR AUTO OFF/ON
FRONT MIC REF
–60dB/–50dB/
–40dB
REAR MIC REF
–60dB/–50dB/
–40dB
MIN ALARM VOL OFF/SET
SP ATT LEVEL
OFF/3dB/6dB/
9dB
HEADPHONE OUT MONO/STREO Selects whether to make the rear earphone
AU DATA LEN
16bit/24bit
(IMX)
AU REF LEVEL
–20dB/–18dB/
–16dB/–12dB/
EBUL
AU REF OUT
0dB/+4dB/
–3dB/EBUL
AU CH12 AGC
MONO/STREO Selects whether to perform automatic input
MODE
AU CH34 AGC
MONO/STREO/
MODE
OFF
AU AGC SPEC
–6dB/–9dB/
–12dB/–15dB/
–17dB
AU LIMITER
OFF/–6dB/
MODE
–9dB/–12dB/
–15dB/–17dB
AU OUT LIMITER OFF/ON
Description
Selects the sources to be recorded to channels
CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-
3/CH-4 switches.
Turns the XLR connection automatic
detection on or off.
Sets the reference level of the front
microphone.
Sets the reference level when the AUDIO IN
CH1 connector is set to MIC.
Volume of the monitor speaker alarm tone
when it is turned all the way down.
OFF: Almost inaudible.
SET: Faintly audible.
Lowers the volume of the monitor speaker.
Has no effect on earphone volume.
monaural or stereo.
For details, see "Setting the Recording
Format" (page 51).
Sets the output level of the 1 kHz test signal.
Sets the output reference level.
level adjustment of analog audio signals to be
recorded on channels 1 and 2 independently
for each channel, or in stereo mode.
Selects whether to perform automatic input
level adjustment of analog audio signals to be
recorded on channels 3 and 4 independently
for each channel, or in stereo mode, or not at
all (OFF).
AGC saturation level setting.
For manual audio input level adjustment,
selects the limiter saturation level for loud
input signals.
Turns the audio output limiter on or off.

Advertisement

Table of Contents
loading

Table of Contents