Sony PDW-850 Operation Manual page 170

No. Page
10 TIMECODE
11 ESSENCE
MARK
170
Menu List
Item Settings
TC OUT AUTO/GENE
DF/NDF DF/NDF
(When SYSTEM
FREQUENCY is set
to 59.94i)
EXT-LK DF/NDF INT/EXT
(When SYSTEM
FREQUENCY is set
to 59.94i)
EXT-LK UBIT INT/EXT
LTC UBIT FIX/TIME
VITC UBIT (SD) FIX/TIME
WATCH AUTO OFF/ON
ADJ
UBIT GROUP ID 000/101
VITC INS LINE 1 NTSC: 12H to
PAL: 9H to 19H
VITC INS LINE 2 NTSC: 12H to
PAL: 9H to 21H
RET SHOT MARK OFF/ON
1
RET SHOT MARK OFF/ON
2
INDEX PIC. POS 0SEC to 10SEC
(in 1 sec steps)
FIND MODE R.ST/CLIP
Description
Selects the timecode signal output.
AUTO: Outputs the timecode generator
output during recording and outputs the
timecode reader output during playback.
GENE: Outputs the timecode generator
output during recording and playback.
Sets DF or NDF mode.
DF: Drop frame mode
NDF: Non-drop frame mode
Selects either internal setting or external
setting for DF/NDF.
INT: Internal
EXT: External
Sets whether the LTC UBIT setup value locks
to an INT or an EXT source when the
timecode is locked to an external source.
INT: Internal lock
EXT: External lock
Sets the data to be recorded in U-BIT of LTC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Sets the data to be recorded in U-BIT of
VITC.
FIX: Records the data that is set by the user.
TIME: Records the present time.
Matches the time of the internal clock with the
time data of the user bits of an external
timecode. Turns the automatic time correction
function of the internal clock on or off.
Selects the U-BIT GROUP ID.
Selects the line into which VITC is to be
16H to 19H inserted.
to 22H
18H to 19H
to 22H
For details, see "Recording essence marks"
(page 77).
For details, see "Setting the thumbnail image
at recording time" (page 78).
Specify the frame to be cued up when the
PREV or NEXT button is pressed.
R.ST: The frame where a Rec Start essence
mark is set
CLIP: The first frame of the clip