Sony PDW-850 Operation Manual page 211

For details, see "To select the file information
items to be displayed" (page 211).
About the USER menu settings to be saved on a
USB flash drive
Settings for items on all pages of the USER menu
are saved on the USB flash drive as a user file.
Note
The following items cannot be saved.
• LOAD CUSTOM DATA, LOAD OUT OF USER,
BEFORE FILE PAGE, and USER LOAD WHITE on
the USER FILE 2 page
• SCENE WHITE DATA on the REFERENCE page
• FRAME RATE on the REC FUNCTION page
• LENS FILE SELECT on the LENS FILE page
• SYSTEM LINE, SYSTEM FREQUENCY, SCAN
MODE, and COUNTRY on the FORMAT page
• NUMERIC on the CLIP TITLE page
• SKIN AREA IND and SKIN DTL SELECT on the
SKIN DETAIL page
• MATRIX AREA IND and MTX(MULTI) AXIS on
the MTX MULTI page
If data cannot be saved
If one of the following error messages appears
during or after the save operation, then the data
was not saved.
Error message Cause
NO USB No USB flash
MEMORY drive is
(flashing) connected.
USB The LOCK
MEMORY switch on the
INHIBIT USB flash drive
(flashing) is set to the
write protect
position.
USB A USB flash
MEMORY drive error
ERROR occurred.
(flashing)
To set the file ID
You can set an file ID before you save your data
as a user file. This will help you identify the user
file quickly. The file ID that has been set is saved
together with the data.
Note
Set the file ID before saving data on the USB flash drive.
Otherwise, the file ID is not saved with the other data.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
2
3
4
Action
Connect or
reconnect the
USB flash
drive.
Set the LOCK
switch to the
write enable
position.
Reconnect to
confirm the
error, and
consult a Sony
service
representative.
To select the file information items to be
displayed
You can select the user file information items to
be displayed on the USER FILE SAVE page and
USER FILE LOAD page (P00 to P19), that are
used to save and load data to and from a USB
flash drive.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
Display the USER FILE page of the
FILE menu.
For details on menu operations, see "Basic
menu operations" (page 184).
Select F. ID, and press the MENU knob.
A character table appears.
F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID :? x
i#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
Follow steps 3 and 4 described in
"Setting the shot ID" (page 196) to enter
characters.
When you have finished entering the
file ID, turn the MENU knob to move x
to END, and press the MENU knob.
The entered file ID is now displayed.
F01 USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID : ID-001
USER PRESET
File ID that has been set appears.
When you carry out a user file save operation
(see page 210), the set file ID is saved on the
USB flash drive together with the data.
Saving and Recalling User Files
TOP
: EXEC
: EXEC
ESC END
TOP
: EXEC
: EXEC
: EXEC
211