Item
Description
MARKER
Not to display all markers, set to OFF.
CENTER
To display the center marker, set to ON.
SAFETY
To display the safety zone, set to ON.
ZONE
SAFETY
To select the safety zone range (80%,
AREA
90%, 92.5% or 95%), when SAFETY
ZONE is set to ON.
ASPECT
To display the aspect marker, set to ON.
ASPECT
To select the type (4:3, 13:9, 14:9) of
SELECT
the aspect marker.
ASPECT
To make the areas out of the selected
1)
aspect marker dimmer, set to ON.
MASK
ASPECT
To set the mask level (1/2, 1/4 or 1/8),
MASK LVL
when the ASPECT MASK is set to ON.
100%
To display the effective pixel area, set to
MARKER
ON.
1) The ASPECT MASK item is for processing the signal to be output to
the viewfinder. When R, G, or B is selected for the TEST OUT
SELECT item from the menu, the same video signal is output to the
viewfinder and the TEST OUT connector. Thus, when the ASPECT
MASK item is set to “ON” with R/G/B selected, the masked video
signal is output to the TEST OUT connector.
3
Perform the settings for each item.
b
1 Turn the MENU knob to move the
mark to the
item you want to set, and press MENU knob.
b
The
mark on the left of the selected item changes
to the z mark, and the z mark on the left of the
setting changes to a ? mark.
2 Turn the MENU knob to change the setting, and
press the MENU knob.
The z mark on the left of the selected item returns
b
to a
mark, and the ? mark on the left of the setting
returns to a z mark.
4
To continue setting other items, repeat step 3.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
The menu disappears from the viewfinder screen, and
the display indicating the current status of the
camcorder appears along the top and bottom of the
screen.
5-2-5 Setting the Viewfinder
Use the VF SETTING page of the USER menu to select
items related to the viewfinder.
Page 86