Sony PDW-850 Operation Manual page 58
Hide thumbs
Also See for PDW-850:
- Specifications (2 pages) ,
- Operation manual (95 pages) ,
- Operation manual (280 pages)
Table of Contents
Advertisement
1
Follow the procedure described in
"Selecting the display items" (page 192)
to set the VF DISPLAY MODE item to
"2" or "3" on the VF DISP 1 page of the
USER menu.
2
Flick the SHUTTER selector from ON
to SELECT.
The current shutter setting indication appears
for about 3 seconds in the setting change and
adjustment progress message display area of
the viewfinder screen.
Examples: ": SS : 1/250", ": ECS : 60.0 Hz"
3
Before the shutter setting indication
disappears, flick the SHUTTER
selector down to SELECT again and
repeat this until the desired mode or
speed appears.
When all modes and speeds are displayed,
the display changes in the following order.
Standard mode (with system frequency: 59.94i)
SLS mode
If you have changed the configuration, only
the selected modes and speeds appear.
• When the unit is shipped from the factory, it is
configured to display all of the modes and
speeds in "Shutter modes" (page 57), except
SLS mode. You can change this configuration
by selecting only the required modes and
speeds on the SHT ENABLE page of the
OPERATION menu (see page 153).
• Shutter speeds in standard mode can also be
switched to angle display by using SHT DISP
MODE in the CAM CONFIG 2 page of the
MAINTENANCE menu (see page 172).
To set the shutter speed in ECS or SLS
mode
1
Set the shutter speed mode to ECS or
SLS (see the previous item).
2
Turn the MENU knob to select the
desired frequency or number of frames.
58
Setting the Electronic Shutter
When the RM-B170 Remote Control Unit is
connected
You can set the shutter speed of ECS or SLS with
the RM-B170.
To change the range of choice of shutter
mode and speed settings
You can reduce the time required to select the
shutter mode and speed by narrowing the choice
of settings in advance. This can be done by using
the SHT ENABLE page of the OPERATION
menu.
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B170
or another remote control unit is connected to the
camcorder.
1
ECS mode
2
3
Note
Display the SHT ENABLE page of the
OPERATION menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" (page 184).
025 SHT ENABLE
SHUTTER ECS
SHUTTER SLS
SHUTTER 1/100
SHUTTER 1/125
SHUTTER 1/250
SHUTTER 1/500
SHUTTER 1/1000
SHUTTER 1/2000
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
b on the left of the selected item changes to
z and z on the left of the setting changes to
?.
Turn the MENU knob until ON
appears, then press the MENU knob.
z on the left of the selected item changes to
b and ? on the left of the setting changes to
z.
To set another mode or speed, return to step
2.
Note that only the shutter speeds set to ON
can be selected with the SHUTTER selector.
:
ON
:
OFF
:
ON
:
ON
:
ON
:
ON
:
ON
:
ON
Advertisement
Table of Contents
