Color Tv Standard Settings (Settings For Frame Frequency) - Panasonic AG-HPX300 Operating Instructions Manual

Color TV Standard Settings
(Settings for frame frequency)
The unit is delivered with the color TV standard not yet specified. To revise the settings for frame frequency according to the
preferred standard, refer to the procedures described below.
1
After connecting the unit to the power supply and then
turning on the power, press the MENU SW button while
pressing the LIGHT SW button to open OPTION
MENU.
2
Turn the JOG dial button to move the cursor (arrow) to
the AREA SELECT item on the AREA SETTING
screen in OPTION MENU, and the press the JOG dial
button.
*** OPTION MENU ***
OPTION
#
AREA SETTING
3
Select the area among NTSC, NTSC(J), and PAL. After
selecting the area by turning the JOG dial button, press
the JOG dial button.
< AREA SETTING >
#
AREA SELECT: PAL
_AREA SET
4
Move the cursor (arrow) to _ AREA SET by turning
the JOG dial button, and then press the JOG dial but-
ton. The following window appears.
AREA SET?
YES
#
NO
5
Move the arrow ( ) to YES and press the JOG dial but-
ton. The settings selected in Step 3 above are reflected
in FACTORY and CURRENT DATA on the screen.
6
Turn off the power supply once and then turn on it
again.
Notes
The settings are not saved unless SET is executed even if
NTSC, NTSC(J), or PAL is selected in the AREA SELECT.
When AREA SELECT is revised, the "_ AREA SET"
blinks.
When these items are set when the unit is used for the first
time, only the following 8 items are revised. When the
other settings of the unit are set in MAIN MENU, the
MENU setting values for items other than the following 8
are ones that were set at the factory.
settings
SYSTEM 1080-
MODE 59.94i
CAMERA
60i
MODE
1
7.5%
SET UP*
2
7.5%
D/C SET UP*
REAR LINE IN
+4dB
LVL
AUDIO OUT
+4dB
LVL
HEAD ROOM 20dB
GUI metadata
American
language
English
indication
Not
LANGUAGE
displayed
DATA
MDY
3
FORMAT*
*1 SET UP of the DOWN CON SETTING menu
(Enabled only for 1080-59.94i)
*2 SET UP of the SYSTEM MODE menu
(Enabled only for 480-59.94i)
*3 Select THUMBNAIL > SETUP > DATA FORMAT from the
thumbnail menu. For details refer to [Setting the Thumbnail
Display Mode] (page 128).
General Color TV Standard Settings (Settings for frame frequency)
Factory
NTSC NTSC(J)
1080- 1080-
59.94i 59.94i
60i 60i
7.5% 0%
7.5% 0%
+4dB +4dB
+4dB +4dB
20dB 20dB
American Japanese/
English For Japan
Not ENDLISH
displayed JAPANESE
MDY YMD
PAL
1080-50i
50i
0%
0%
0dB
0dB
18dB
American
English
Not
displayed
DMY
13