Main Ram Size; Serial No; Customer Id; Function - Konica Minolta bizhub 164 Service Manual

Field Service Ver. 2.0 Jun. 2010
11.6.8

MAIN RAM SIZE

A. Use
• To display the main memory size.
11.6.9

SERIAL NO.

A. Use
• To display the serial number of the machine.
11.6.10

CUSTOMER ID

A. Use
• To display the customer ID of the machine.

11.7 FUNCTION

11.7.1

PAPER FEED TEST

A. Use
• To check for correct paper passage of the paper feed and transport system by letting the
machine consecutively take up and feed paper without involving actual printing action.
• Here are the details of operation involved in the paper passage motion.
The scanner does not make any scan motion.
Paper is fed until the corresponding paper source runs out of paper.
No counters are activated.
(Except PM counter, maintenance counter, supplies counter)
It cannot be operated at the time of warming up.
A printing paper source can select on the screen of the function mode.
• Used when a paper misfeed occurs
B. Procedure
1. Select the paper source.
2. Press the Menu/Select key to start the paper feed test.
1
3. Press the Stop key to stop the paper feed test.
11.7.2

PROCESS CHECK

• HV output (for factory setting only) *Should not be used
TRAY1/BYPASS
11. SERVICE MODE
111
1