Installing Multifunction Switch F125 - Volkswagen Golf Variant 2007 Workshop Manual

– Carefully bend back hooks of lock washer -2- using a screw‐
driver.
– Renew securing clip if hooks have broken off.
– Unscrew nut -1-.
– Remove bolts -5-.
– Pull multifunction switch -4-, together with washers -2- and
-3-, off selector shaft -6-.
3.2 Installing multifunction switch -F125-
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331-
Carry out procedure as follows:
Install in the reverse order of removal, observing the following:
– Place multifunction switch -4- on selector shaft -6-.
– Tighten securing bolts -5- for multifunction switch hand-tight.
– Bend hooks of lock washer -2- back.
– Put washers -2- and -3- on selector shaft -6-.
– Install washer -2- with hooks pointing up.
– Install washer -2- with long, narrow guides in long, narrow re‐
cesses of selector shaft -6-.
– Tighten nut -1- to 7 Nm.
– Secure nut -1- by bending up hooks on lock washer -2-.
– Renew securing clip if hooks have broken off.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
3. Multifunction switch F125
19