Removing And Installing Knob - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– Press yellow plastic part -arrow- from right to left.
Lever can now be moved from position "P".
4.7

Removing and installing knob

It is possible with all knobs that the button is pressed into the knob.
Never install a knob with the button pressed in.
– Before removal, pull button out past its pressure point.
– Secure button with a cable tie or wire against being pressed
in.
– Unclip cover.
– Release knob.
– Lock knob again after installing.
– Press plastic part under knob back down.
– Remove transport guard of a "new" knob after releasing knob.
– Pull connector from cover.
– Pull off knob upwards.
32
Rep. Gr.37 - Controls, housing