Volkswagen Golf Variant 2007 Workshop Manual page 65

– Unbolt suspension link from wheel bearing housing on both
sides.
Torque settings ⇒ Rep. Gr. 40 ; Assembly overview - subframe,
anti-roll bar, suspension links .
– If present, remove heat shield above right drive shaft
-arrows-.
– Press both drive shafts out of gearbox. This procedure is de‐
scribed in ⇒ Rep. Gr. 40 ; Repairing drive shafts; Removing
and installing drive shafts .
– Remove left drive shaft ⇒ Rep. Gr. 40 ; Repairing drive shafts;
Removing and installing drive shafts .
– Raise right shaft as far as possible and secure in this position.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
7. Removing and installing gearbox, Jetta 2011 ▸
61