Volkswagen Golf Variant 2007 Workshop Manual page 46

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– If present, remove earth strap from bracket -A-.
– Remove 2 securing bolts for gearbox mounting on bracket
-A- and 4 bolts for bracket on gearbox.
The bracket is removed later.
– Depress brake pedal to remove bolt for left drive shaft
-arrow- (second mechanic required).
Note
After this, do not set vehicle on the ground any more ⇒ Rep. Gr.
40 ; Repairing drive shafts; Removing and installing drive shafts .
– Raise vehicle.
– Remove noise insulation tray.
– Remove vacuum pump with bracket and lines. "The pump is
located near the ATF filler tube."
– If not already done, now remove electrical connectors from
gearbox.
– Remove starter ⇒ Rep. Gr. 27 ; Removing and installing
starter .
– Remove ⇒ pendulum support, first bolt -A- and then bolts
-B-.
Note
When installing, first tighten bolts -B-, then bolt -A-, torque set‐
tings ⇒ Rep. Gr. 40 ; Assembly overview - subframe, anti-roll
bar, suspension links .
– Unbolt suspension link from wheel bearing housing on both
sides.
Torque settings ⇒ Rep. Gr. 40 ; Assembly overview - subframe,
anti-roll bar, suspension links .
42
Rep. Gr.37 - Controls, housing