Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– Also clip selector lever cable into bracket. Make sure that
bracket does not make contact with ATF cooler.
Tighten -nuts- to 8 Nm.
– Put selector housing onto selector lever cable.
– Insert selector lever cable into selector mechanism.
– Insert selector lever cable into bearing and insert pin from
above, downwards through eye -direction of arrow 2-.
When you have checked freedom of movement of cable
⇒ page 30
, insert locking plate.
– Attach selector lever cable with new locking plate on cable
support bracket of selector mechanism.
28
Rep. Gr.37 - Controls, housing