Volkswagen Golf Variant 2007 Workshop Manual page 99

– Remove selector lever -1- from selector shaft.
– In the process, carefully grip selector lever -1- with pliers -2-
so that torque is not transferred to multifunction switch -F125- .
– Note spool valve -3- on valve body into which selector lever
engages so that this is not damaged.
The spool valve is very "sensitive". Even the slightest damage will
lead to faults in operation.
– Therefore, always push spool valve into valve body, secure
against falling out and never interchange.
The bolts are of different lengths and must be replaced.
Only the marked securing bolts -arrows- may be loosened.
If other bolts are loosened, the function of the valve body is im‐
peded or the valve body falls to pieces.
– Loosen securing bolts -arrows-, -arrows A- and -arrows B- for
valve body diagonally and carefully remove valve body.
– Remove brackets -1- and -2-.
-3- valve body designation, e.g. A2 in this case.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
95
4. Valve body