Volkswagen Golf Variant 2007 Workshop Manual page 53

– Remove cable retainer -1- from starter bolt -arrow-.
– Remove upper starter motor bolt.
– Remove upper engine/gearbox connecting bolts.
To support engine and gearbox:
– Remove cables -1- from transportation bracket -3-.
– Unbolt transportation bracket -3- from engine -2- and pull out
of eye -arrow-.
– Attach a shackle -10 - 222 A /12- in "this" eye.
– Set up support device -10 - 222 A- .
– Extend right hook -10 - 222 A /10- using adapter -10 - 222 A /
7- .
The hook faces downwards and will later be hooked into the en‐
gine block.
– Remove noise insulation tray.
– Remove lower part of left wheel housing liner.
– If present, remove heat shield above right drive shaft
-arrows-.
6. Removing and installing gearbox, Jetta 2005 ▸, Bora 2006 ▸, Golf Variant 2007 ▸, Jetta Wagon 2008 ▸
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
49