– Hook wiring harness -3- into retainer -7- -arrow B-.
– Push selector lever -2- onto selector shaft -6-.
Ensure that selector lever pin -2- engages into spool valve -1-
-arrow A-. If necessary, position spool valve accordingly.
– Set washer -5- and nut -4- on selector shaft -6-.
Centring collar of nut must face washer and run into washer on
tightening.
Wiring harness must be routed beneath selector lever.
– Tighten selector lever nut -1- to specified torque
– In the process, carefully grip selector lever -1- with pliers -2-
so that torque is not transferred to multifunction switch -F125- .
– Note spool valve -3- on valve body into which selector lever
engages so that this is not damaged.
– Connect the connectors to solenoid valves -2- to -9- according
to the identifications which you have noted.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
⇒ page 89
.
99
4. Valve body