Volkswagen Golf Variant 2007 Workshop Manual page 56

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed automatic gearbox 09G - Edition 04.2010
– Hook adapter -10 - 222 A /7- into engine block.
– Pull coolant hoses off ATF cooler.
Tighten right spindle one turn (more is not necessary).
– Support engine and gearbox with left spindle. Do not raise.
– Remove 2 securing bolts for gearbox mounting on bracket
-A- and 4 bolts for bracket on gearbox.
– Now remove assembly mounting bracket. To do this, lower
engine and gearbox slightly via left spindle of support bracket
-10 - 222 A- .
4 turns are sufficient.
– Remove lower engine/gearbox connecting bolts.
– Leave an easily accessible bolt installed for safety.
– Before you now remove final connecting bolt, support gearbox
with engine and gearbox jack -V.A.G 1383 A- , gearbox sup‐
port -3282- and adjustment plate -3282 /36- .
– Secure gearbox to gearbox support -3282- using bolt -1-.
– Only now is the final bolt removed.
– Press gearbox off engine while simultaneously pressing tor‐
que converter out of drive plate of engine.
– Note clearance from subframe when lowering. If necessary,
readjust gearbox support -3282- slightly.
52
Rep. Gr.37 - Controls, housing