Li-Ion Battery; Battery Connectors; Standard Battery - Honeywell HX2 User Manual

Li-Ion Battery

Main battery charging is handled exclusively by the HX2 Battery Charger/analyzer and the battery charger integrated into the
HX2powered cradle.
The Standard battery is much thinner than the Extended battery.
Each battery will fit in the battery sleeve on an armband, hip flip and the voice case.
Note: Do not allow water or chemical cleaning agents of any kind to come in contact with the battery
charging contacts or the battery cable connector; they may be damaged. If necessary, clean them
with a soft-bristle, dry brush or compressed air.

Battery Connectors

Note: When placing the tethered battery in an armband or hip flip battery sleeve, ensure the Battery
Charge/Connect terminals are protected from accidental damage by keeping them covered by the
sleeve fabric at all times.

Standard Battery

1. Battery Charge/Connect Terminals
2. Battery Cable Connector
1-9