2. To select the correct EDID timing, tap Main > Configuration > EDID Timing Select and
select the required EDID timing.
3. Connect all the required cables between the 3D source and the projector.
4. Configure your 3D source.
Touch panel controller
The touch panel controller (TPC) is a touch-sensitive screen. Use the TPC to control the projector,
manage sources, adjust the display, and view status information. The TPC is mounted on the rear of
the projector and can be adjusted to improve the TPC viewing angle. A side USB port can be used to
download log files and install software upgrades.
For remote applications, the TPC can be dismounted from the projector and used with the optional
cable to allow projector control from a maximum distance of 100 ft (30 m).
Mirage 4K25 Setup Guide
020-101362-02 Rev. 1 (01-2015)
Installation and Setup
24