Christie Mirage 4K25 Setup Manual page 10

Always disconnect all power sources before performing maintenance or service procedures.
See the product user manual for specific information and directions.
See the product service manual for specific information and directions.
Mirage 4K25 Setup Guide
020-101362-02 Rev. 1 (01-2015)
Never look directly into the projector lens. The extremely high brightness can
cause permanent eye damage.
This label warns of a cross-connection hazard
when installing multiple projectors at once. A fire
hazard exists if a lamp power supply interlock
cable is connected to a different projector than its
lamp power cables.
For more information, see
and level in the Installation and Setup
Introduction
Adjust the projector tilt
chapter
10