Projector Components - Christie Mirage 4K25 Setup Manual

Projector components

A
ID Item
A Touch panel controller (TPC)
B LED status indicators
C Manual douser override
D Lamp door and lamps
E Exhaust duct and vane switch
F Liquid cooling air filter cover
and air filter
G Shroud (two-piece)
H Projection lens
I Air filter cover and air filter
J Input panel faceplate
Mirage 4K25 Setup Guide
020-101362-02 Rev. 1 (01-2015)
D
B
C
B
J
LENS SIDE
Description
A touch-sensitive screen used to control and monitor operation. For
information about TPC controls and settings.
LED color and blinking rates (located in both back corners of the projector)
provide information about the status of the projector. For information about
projector states and status, see
33.
Closing the douser rotates a shutter blade in front of the lamp and reduces
the lamp power to 2.0 kW to conserve lamp life. The override is for
emergency use only.
The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp
types, see the
Extracts heated air from the lamp compartment. The vane switch mounted
inside the rigid port monitors airflow. See
Filters air before it circulates to cool the heat exchanger.
Covers the motorized lens mount assembly.
A variety of lenses can be used with the Mirage 4K25. For a list of available
lenses, see the
Filters the intake air before it circulates through the front compartment to
cool the main electronics.
Provides a variety of ports for connecting external devices. For information
about connecting devices and inputs, see
LAMP SIDE
E
I
Projector LED status indicators
Mirage 4K25 User Manual (P/N:
Mirage 4K25 User Manual (P/N:
Installation and Setup
F
G
H
on page
020-101361-XX).
Site requirements on page 11.
020-101361-XX).
Connect Devices on page 25.
12