3.1 Anti-static Precautions
WARNING!
Failure to take ESD precautions during the installation of the
IMBA-8650 may result in permanent damage to the IMBA-8650 and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IMBA-8650. Dry climates are especially susceptible to ESD. It is critical that
the following anti-static precautions are strictly adhered to whenever handling the
IMBA-8650 or any other electrical component.
Wear an anti-static wristband - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the IMBA-8650.
Self-grounding - Touch a grounded conducting material before handling and
periodically while handling the IMBA-8650.
Use an anti-static pad - When configuring the IMBA-8650, place it on an
antic-static pad to reduce the possibility of ESD damage.
Only handle the edges of the IMBA-8650 - When handling the IMBA-8650,
hold it by its edges.
3.2 Unpacking
3.2.1 Unpacking Precautions
When the IMBA-8650 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 3.1.
Make sure the packing box is facing upwards so the IMBA-8650 does not fall
out of the box.
Make sure all the components shown in Section 3.3 are present.
Page 42
IMBA-8650 Motherboard